hi ,everyone.
i'm using a ZEBEX 3051HS barcode scanner with DHPOS.
Every time i try to scan a barcode [13digits] as a input to my stock table, scanner turn into programming mode and no matter what press on keyboard it does not continue to scan.
does anyone has such experience, and solutions for this. please replay. thank you.
need help, barcode scanner
Moderators:daleadmin, Dale Harris, Alan, Andrew
Re: need help, barcode scanner
woguant7127,
Did you do the scanner test?
Load any word processing program and scan the same barcode 3 times. The numbers should come out like this...
1234567890123
1234567890123
1234567890123
If they come out all in a row like this...
123456789012312345678901231234567890123
Then the scanner is not set to use [ENTER] as the termination character.
I do not know what you scanner's program mode is. Usually to program a scanner you have to scan a special barcode that is in your scanner's manual. Are you saying that by scanning a product's barcode that that barcode is programming your scanner? When you do the scanner test described above does that put your scanner into programming mode?
Dale
Did you do the scanner test?
Load any word processing program and scan the same barcode 3 times. The numbers should come out like this...
1234567890123
1234567890123
1234567890123
If they come out all in a row like this...
123456789012312345678901231234567890123
Then the scanner is not set to use [ENTER] as the termination character.
I do not know what you scanner's program mode is. Usually to program a scanner you have to scan a special barcode that is in your scanner's manual. Are you saying that by scanning a product's barcode that that barcode is programming your scanner? When you do the scanner test described above does that put your scanner into programming mode?
Dale
-
- Posts:4
- Joined:Sun Sep 04, 2011 5:45 am
Re: need help, barcode scanner
thank you for reply, i tried to scan a product barcode while Word is open, but there is nothing displayed on the blank document. and according to the user's manual it says, 'the scanner has successfully decode,but the object is not removed from scan window. the scanner is in programming mode.'
er.. does it mean my scanner got malfunction, or something else.
er.. does it mean my scanner got malfunction, or something else.
Re: need help, barcode scanner
woguant7127,
I have never used this scanner so I cannot offer any suggestions. However failing the word processing test is not good sign. I did find the manual for your scanner here http://www.pinteq.co.za/downloads-2715.html
You can look at the manual and see it it has the solution to your problem. You can also contact the folks you bought it from to see if they have any ideas.
Dale
I have never used this scanner so I cannot offer any suggestions. However failing the word processing test is not good sign. I did find the manual for your scanner here http://www.pinteq.co.za/downloads-2715.html
You can look at the manual and see it it has the solution to your problem. You can also contact the folks you bought it from to see if they have any ideas.
Dale
-
- Posts:4
- Joined:Sun Sep 04, 2011 5:45 am
Re: need help, barcode scanner
thanks a lot for helping me, i think will buy a new this week.
Re: need help, barcode scanner
woguant7127,
If you have downloaded the manual, you could try scanning the end of configuration code, then try the test use MS Word.
VictorY
If you have downloaded the manual, you could try scanning the end of configuration code, then try the test use MS Word.
VictorY
-
- Posts:4
- Joined:Sun Sep 04, 2011 5:45 am
Re: need help, barcode scanner
i have tried 'end of configuration' still not working, i think there something wrong with scanner itself.victory wrote:woguant7127,
If you have downloaded the manual, you could try scanning the end of configuration code, then try the test use MS Word.
VictorY
Who is online
Users browsing this forum: No registered users and 134 guests