Hi
I need help making a cable to open the drawer.
The is drawer a Fujitsu 9535 and the printer is a epson TM-U300PD
1 Frame GND --
2 Drawer kick-out drive signal 1 Output
3 Drawer open/close signal Input
4 +24 V --
5 Drawer kick-out drive signal 2 Output
6 Signal GND --
the port on the drawer is a RJ45.
Thank You!!!
Help get a drawer to open
Moderators:daleadmin, Dale Harris, Alan, Andrew
what port is on the printer for your cash dawer
what port is on the printer for your cash dawer.
if it is the sand as the cash dawer you could use a network cable that could be pickup from a computer shop.
please could you let me know as i might be able to help you.
Tony Mc Guire
if it is the sand as the cash dawer you could use a network cable that could be pickup from a computer shop.
please could you let me know as i might be able to help you.
Tony Mc Guire
I have a cabe that i could post to you for free if you want to send me a privet E-mail. the cabe is one that a friend of mine had for one of his cash drawer. It has RJ11 on both ends and it will work with RJ45.
I will wate two days after you E-Mail to make sure it was from you as I only have ONE of these cables.
I will wate two days after you E-Mail to make sure it was from you as I only have ONE of these cables.
Tony McGuire
Ireland Support
Ireland Support
Who is online
Users browsing this forum: No registered users and 263 guests