Complete IBM 4694 Terminal with software

Business to Business forum: offer your wares here. You can offer up whatever it is your business has to offer as long as it would appeal to small businesses. Disclaimer: we have not tested or verified the products of anyone who posts here, this is simply for informational purposes. Buyer beware.

Moderators: daleadmin, Andrew

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Complete IBM 4694 Terminal with software

Post by The IBM Guy » Tue Jan 24, 2006 4:39 pm

See:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
and bid from only 99p ($2)- I ship worldwide!
This system will work in the USA on 110v

Will also work with DHPOS
Last edited by The IBM Guy on Tue Jan 24, 2006 5:37 pm, edited 2 times in total.

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Tue Jan 24, 2006 4:39 pm

IBM 4694-004 EPOS SYSTEM WITH SOFTWARE, MAUNAL, ETC...

YOU ARE BIDDING ON A FANTASTIC, CLEAN, LOOKS NEW IBM EPOS TERMINAL.

INCLUDES BASE UNIT, DISPLAY, KEYBOARD, MODEL 2 PRINTER, TILL ROLLS, 2 X POP-UP CASH DRAWERS, SYMBOL HAND SCANNER, 2 SETS OF KEYS, ALL CABLES, PSU, FIXINGS,

AND ALL MANUALS! (+ IBM SERVICE FLOPPY, SOFTWARE)

THE BASE UNIT IS 2 MONTHS OLD AND LOOKS BRAND NEW.
IT HAS AN AMD 400MHZ PROCESSOR, 128MB RAM AND RUNS MS DOS.
1.5GB HARD DRIVE, FLOPPY, VGA, 2 X PCI, ETC..

THE BASE UNIT IS BOXED.

THE PRINTER (MODEL 2) IS A BIT OLD, BUT IN ACE WORKING CONDITION
WITH JOURNAL PRINTING, 80C WIDE PRINTING ACTIVE DOT MATRIX, A4 PRINTING
INCLUDES 3 X RIBBONS (2 OF WHICH ARE NEW)

THE POS KEYBOARD HAS A BUILT IN KEY LOCK BARREL WHICH CONTROLS THE LOGON FUNCTION OF THE SOFTWARE. IT INCLUDES 2 SETS OF KEYS AND A SERVICE KEY (TO CHANGE THE BARREL).

THE CUSTOMER DISPLAY IS A WIDE 2 LINE ACTIVE DISPLAY
WITH SCROLLING MESSAGE (EXAMPLE "NEXT CUSTOMER PLEASE")
INCLUDES FIXINGS

THE BARCODE READER IS A SYMBOL RS HANDHELD SCANNER

THE CASH DRAWER CONSISTS OF 2 X CASH BOXES WITH 1 BASE.
THE BASE IS MOUNTABLE ON ANY SURFACE WITH INTERCHANGABLE BOXES
BOTH KEYS ARE INCLUDED WITH A MASTER KEY

THE OPERATING MANUALS, INSTALLATION MANUALS, AND SERVICE MANUALS ARE ALL THERE.
THE SYSTEM RUNS ON MS DOS AND IS COMPUTER BASED.

THE SOFTWARE IS HIDOS V5.4 - AN EXCELLENT POS SOLUTION
INCLUDES 5K STOCK LINES, 50 USERS, CONTROL, OFF-LOGIN PLU'S, ETC...
ALLOWS BACK-LOG STOCK CONTROL.

THE SOFTWARE HAS A PRE-PAID LICENCE WORTH £600!!!

THE SYSTEM DOES NOT REQUIRE A MONITOR AT ALL
(THERE IS A VGA PORT FOR ADVANCED CPU CONFIG).

THE SYSTEM IS READY TO GO - JUST REQUIRES PROGRAMMING TO YOUR REQUIREMENTS.
SUITABLE FOR DEPARTMENT STORES, SUPERMARKETS, HARDWARE SHOPS, ETC...
NOT SUITABLE FOR THE CATERING INDUSTRY.

EVERYTHING IS VERY CLEAN (THE BASE UNIT LOOKS NEW)

WORTH OVER £4,000 NEW!!! REMEMBER - THE BASE UNIT IS 2 - 3 MONTHS OLD!

IT COMES FULLY TESTED WITH A 30 DAY RTB WARRANTY AGAINST ANY FAULTS!

User avatar
ibmsystems
Forum Regular
Posts: 425
Joined: Tue Oct 25, 2005 10:54 pm
Location: London - UK

Post by ibmsystems » Tue Jan 24, 2006 4:41 pm

is that your ebay store?

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Tue Jan 24, 2006 4:44 pm

Yes - we have hundreds of systems in stock which will appear over the week.

NCR
IBM
GELLER
EPSON

and our home-made ones!

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Tue Jan 24, 2006 4:49 pm

17"

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Tue Jan 24, 2006 4:51 pm

Delivery to the USA would be £30 GBP

This is for overnight delivery.

AJ

Software for IBM 4694 POS Terminals

Post by AJ » Fri Jan 27, 2006 9:09 pm

Hi Ryan:

Does Intelligent POS sell software, on floppy that will work with Windows 95 or Windows 98 to load to an IBM 4694 POS terminal? Of course my first choice is DH-POS but it looks like it is not really going to work with one of these terminals. I have the larger footprint of the 4694-144 the register with PS/2 keyboard (not the retail config keyboard).

Let me know.

Thanks

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Sat Jan 28, 2006 10:32 am

Hi,

Yes we do sell IBM compatable software on floppy for £49.99 inc P+P worldwide.

AJ

Post by AJ » Sat Jan 28, 2006 12:07 pm

Hi Ryan:

That is good news about the software. It has been very hard to find software that will work with 4694 that will open the cash drawer, print receipts, etc. I completely forgot that you are in the UK though. Will the software operate in terms of UK pounds or is there a way to change to USA dollars? I checked your ebay store to see if the software was available but did not see it. Can you advise what the software's features are? Can this software be loaded and used on the machine for a single store environment? If you like, feel free to email me at sendthemhere@gmail.com

Thanks.

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Sat Jan 28, 2006 7:49 pm

We're launching a new website tommrow along with a new stock inventory of 658 items. Check back in the evening.

The software will detect your country and change the settings.

AJ

Post by AJ » Sun Jan 29, 2006 11:07 pm

Ryan:

When will your new online store go live? I am very excited to check out this software you offer for 49.99pds that works with 4694. What is the name of the software so that I can easily find it. Please advise.

Thanks

User avatar
ibmsystems
Forum Regular
Posts: 425
Joined: Tue Oct 25, 2005 10:54 pm
Location: London - UK

Post by ibmsystems » Mon Jan 30, 2006 1:29 am

The software of which you would recive i think would be HiDOS POS but you would have to find away to reset the software from it default language seting Czech

AJ

Post by AJ » Mon Jan 30, 2006 8:15 pm

IBM Guy...

Will HiDOS only run in Czech as ibmsystems called out above? Let me know. I would like to learn more about it since it will work on the 4694. Of course my first chioce is DHPOS, but because of the issues with 4694's serial printer, drawer, and later if I add a pole display, this just may not be a posibility. My store will probably never have more than 1000 SKU's at a time and since it works with the hard to suit hardware of the 4694 HiDOS may be perfect for me.

Any more info you can provide would be great.

Thanks,

User avatar
ibmsystems
Forum Regular
Posts: 425
Joined: Tue Oct 25, 2005 10:54 pm
Location: London - UK

Post by ibmsystems » Mon Jan 30, 2006 10:19 pm

AJ> No HiDOS Will Run In English you just have to find out how to get in the language set menu :)

User avatar
The IBM Guy
Forum Regular
Posts: 78
Joined: Mon Jun 06, 2005 1:02 pm

Post by The IBM Guy » Tue Jan 31, 2006 12:52 pm

AJ wrote:Ryan:

When will your new online store go live? I am very excited to check out this software you offer for 49.99pds that works with 4694. What is the name of the software so that I can easily find it. Please advise.

Thanks
Sometime this week - HiDOS can be used in a number of languages.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests