Complete IBM 4694 Terminal with software
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
See:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
and bid from only 99p ($2)- I ship worldwide!
This system will work in the USA on 110v
Will also work with DHPOS
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
and bid from only 99p ($2)- I ship worldwide!
This system will work in the USA on 110v
Will also work with DHPOS
Last edited by The IBM Guy on Tue Jan 24, 2006 5:37 pm, edited 2 times in total.
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
IBM 4694-004 EPOS SYSTEM WITH SOFTWARE, MAUNAL, ETC...
YOU ARE BIDDING ON A FANTASTIC, CLEAN, LOOKS NEW IBM EPOS TERMINAL.
INCLUDES BASE UNIT, DISPLAY, KEYBOARD, MODEL 2 PRINTER, TILL ROLLS, 2 X POP-UP CASH DRAWERS, SYMBOL HAND SCANNER, 2 SETS OF KEYS, ALL CABLES, PSU, FIXINGS,
AND ALL MANUALS! (+ IBM SERVICE FLOPPY, SOFTWARE)
THE BASE UNIT IS 2 MONTHS OLD AND LOOKS BRAND NEW.
IT HAS AN AMD 400MHZ PROCESSOR, 128MB RAM AND RUNS MS DOS.
1.5GB HARD DRIVE, FLOPPY, VGA, 2 X PCI, ETC..
THE BASE UNIT IS BOXED.
THE PRINTER (MODEL 2) IS A BIT OLD, BUT IN ACE WORKING CONDITION
WITH JOURNAL PRINTING, 80C WIDE PRINTING ACTIVE DOT MATRIX, A4 PRINTING
INCLUDES 3 X RIBBONS (2 OF WHICH ARE NEW)
THE POS KEYBOARD HAS A BUILT IN KEY LOCK BARREL WHICH CONTROLS THE LOGON FUNCTION OF THE SOFTWARE. IT INCLUDES 2 SETS OF KEYS AND A SERVICE KEY (TO CHANGE THE BARREL).
THE CUSTOMER DISPLAY IS A WIDE 2 LINE ACTIVE DISPLAY
WITH SCROLLING MESSAGE (EXAMPLE "NEXT CUSTOMER PLEASE")
INCLUDES FIXINGS
THE BARCODE READER IS A SYMBOL RS HANDHELD SCANNER
THE CASH DRAWER CONSISTS OF 2 X CASH BOXES WITH 1 BASE.
THE BASE IS MOUNTABLE ON ANY SURFACE WITH INTERCHANGABLE BOXES
BOTH KEYS ARE INCLUDED WITH A MASTER KEY
THE OPERATING MANUALS, INSTALLATION MANUALS, AND SERVICE MANUALS ARE ALL THERE.
THE SYSTEM RUNS ON MS DOS AND IS COMPUTER BASED.
THE SOFTWARE IS HIDOS V5.4 - AN EXCELLENT POS SOLUTION
INCLUDES 5K STOCK LINES, 50 USERS, CONTROL, OFF-LOGIN PLU'S, ETC...
ALLOWS BACK-LOG STOCK CONTROL.
THE SOFTWARE HAS A PRE-PAID LICENCE WORTH £600!!!
THE SYSTEM DOES NOT REQUIRE A MONITOR AT ALL
(THERE IS A VGA PORT FOR ADVANCED CPU CONFIG).
THE SYSTEM IS READY TO GO - JUST REQUIRES PROGRAMMING TO YOUR REQUIREMENTS.
SUITABLE FOR DEPARTMENT STORES, SUPERMARKETS, HARDWARE SHOPS, ETC...
NOT SUITABLE FOR THE CATERING INDUSTRY.
EVERYTHING IS VERY CLEAN (THE BASE UNIT LOOKS NEW)
WORTH OVER £4,000 NEW!!! REMEMBER - THE BASE UNIT IS 2 - 3 MONTHS OLD!
IT COMES FULLY TESTED WITH A 30 DAY RTB WARRANTY AGAINST ANY FAULTS!
YOU ARE BIDDING ON A FANTASTIC, CLEAN, LOOKS NEW IBM EPOS TERMINAL.
INCLUDES BASE UNIT, DISPLAY, KEYBOARD, MODEL 2 PRINTER, TILL ROLLS, 2 X POP-UP CASH DRAWERS, SYMBOL HAND SCANNER, 2 SETS OF KEYS, ALL CABLES, PSU, FIXINGS,
AND ALL MANUALS! (+ IBM SERVICE FLOPPY, SOFTWARE)
THE BASE UNIT IS 2 MONTHS OLD AND LOOKS BRAND NEW.
IT HAS AN AMD 400MHZ PROCESSOR, 128MB RAM AND RUNS MS DOS.
1.5GB HARD DRIVE, FLOPPY, VGA, 2 X PCI, ETC..
THE BASE UNIT IS BOXED.
THE PRINTER (MODEL 2) IS A BIT OLD, BUT IN ACE WORKING CONDITION
WITH JOURNAL PRINTING, 80C WIDE PRINTING ACTIVE DOT MATRIX, A4 PRINTING
INCLUDES 3 X RIBBONS (2 OF WHICH ARE NEW)
THE POS KEYBOARD HAS A BUILT IN KEY LOCK BARREL WHICH CONTROLS THE LOGON FUNCTION OF THE SOFTWARE. IT INCLUDES 2 SETS OF KEYS AND A SERVICE KEY (TO CHANGE THE BARREL).
THE CUSTOMER DISPLAY IS A WIDE 2 LINE ACTIVE DISPLAY
WITH SCROLLING MESSAGE (EXAMPLE "NEXT CUSTOMER PLEASE")
INCLUDES FIXINGS
THE BARCODE READER IS A SYMBOL RS HANDHELD SCANNER
THE CASH DRAWER CONSISTS OF 2 X CASH BOXES WITH 1 BASE.
THE BASE IS MOUNTABLE ON ANY SURFACE WITH INTERCHANGABLE BOXES
BOTH KEYS ARE INCLUDED WITH A MASTER KEY
THE OPERATING MANUALS, INSTALLATION MANUALS, AND SERVICE MANUALS ARE ALL THERE.
THE SYSTEM RUNS ON MS DOS AND IS COMPUTER BASED.
THE SOFTWARE IS HIDOS V5.4 - AN EXCELLENT POS SOLUTION
INCLUDES 5K STOCK LINES, 50 USERS, CONTROL, OFF-LOGIN PLU'S, ETC...
ALLOWS BACK-LOG STOCK CONTROL.
THE SOFTWARE HAS A PRE-PAID LICENCE WORTH £600!!!
THE SYSTEM DOES NOT REQUIRE A MONITOR AT ALL
(THERE IS A VGA PORT FOR ADVANCED CPU CONFIG).
THE SYSTEM IS READY TO GO - JUST REQUIRES PROGRAMMING TO YOUR REQUIREMENTS.
SUITABLE FOR DEPARTMENT STORES, SUPERMARKETS, HARDWARE SHOPS, ETC...
NOT SUITABLE FOR THE CATERING INDUSTRY.
EVERYTHING IS VERY CLEAN (THE BASE UNIT LOOKS NEW)
WORTH OVER £4,000 NEW!!! REMEMBER - THE BASE UNIT IS 2 - 3 MONTHS OLD!
IT COMES FULLY TESTED WITH A 30 DAY RTB WARRANTY AGAINST ANY FAULTS!
- ibmsystems
- Forum Regular
- Posts:425
- Joined:Tue Oct 25, 2005 10:54 pm
- Location:London - UK
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
Software for IBM 4694 POS Terminals
Hi Ryan:
Does Intelligent POS sell software, on floppy that will work with Windows 95 or Windows 98 to load to an IBM 4694 POS terminal? Of course my first choice is DH-POS but it looks like it is not really going to work with one of these terminals. I have the larger footprint of the 4694-144 the register with PS/2 keyboard (not the retail config keyboard).
Let me know.
Thanks
Does Intelligent POS sell software, on floppy that will work with Windows 95 or Windows 98 to load to an IBM 4694 POS terminal? Of course my first choice is DH-POS but it looks like it is not really going to work with one of these terminals. I have the larger footprint of the 4694-144 the register with PS/2 keyboard (not the retail config keyboard).
Let me know.
Thanks
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
Hi Ryan:
That is good news about the software. It has been very hard to find software that will work with 4694 that will open the cash drawer, print receipts, etc. I completely forgot that you are in the UK though. Will the software operate in terms of UK pounds or is there a way to change to USA dollars? I checked your ebay store to see if the software was available but did not see it. Can you advise what the software's features are? Can this software be loaded and used on the machine for a single store environment? If you like, feel free to email me at sendthemhere@gmail.com
Thanks.
That is good news about the software. It has been very hard to find software that will work with 4694 that will open the cash drawer, print receipts, etc. I completely forgot that you are in the UK though. Will the software operate in terms of UK pounds or is there a way to change to USA dollars? I checked your ebay store to see if the software was available but did not see it. Can you advise what the software's features are? Can this software be loaded and used on the machine for a single store environment? If you like, feel free to email me at sendthemhere@gmail.com
Thanks.
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
- ibmsystems
- Forum Regular
- Posts:425
- Joined:Tue Oct 25, 2005 10:54 pm
- Location:London - UK
IBM Guy...
Will HiDOS only run in Czech as ibmsystems called out above? Let me know. I would like to learn more about it since it will work on the 4694. Of course my first chioce is DHPOS, but because of the issues with 4694's serial printer, drawer, and later if I add a pole display, this just may not be a posibility. My store will probably never have more than 1000 SKU's at a time and since it works with the hard to suit hardware of the 4694 HiDOS may be perfect for me.
Any more info you can provide would be great.
Thanks,
Will HiDOS only run in Czech as ibmsystems called out above? Let me know. I would like to learn more about it since it will work on the 4694. Of course my first chioce is DHPOS, but because of the issues with 4694's serial printer, drawer, and later if I add a pole display, this just may not be a posibility. My store will probably never have more than 1000 SKU's at a time and since it works with the hard to suit hardware of the 4694 HiDOS may be perfect for me.
Any more info you can provide would be great.
Thanks,
- ibmsystems
- Forum Regular
- Posts:425
- Joined:Tue Oct 25, 2005 10:54 pm
- Location:London - UK
- The IBM Guy
- Forum Regular
- Posts:78
- Joined:Mon Jun 06, 2005 1:02 pm
Who is online
Users browsing this forum: No registered users and 33 guests