DHES

Found another Till on eBay with DH-POS installed! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3805455275&category=11891 Its an IBM SureOne 4614, the peripherals won't work with DH-POS, and i'm amazed how he managed to get Windows 95 running with 4Mb of RAM! I know its possible but you need to...

Hi again, Never noticed you were from the North! I "think" that the partial cut thing is actually a driver in its own right.. Its ages since I had my Epson T88 attached for playing with! I'm sure there was a different driver called "Epson T88II Partial Cut"? I could be getting confused with the Epso...

Yeah, under Windows printer properties you should find options for the cutter.

Alan

The nearest printer to the T80 is the T85, but looking at the Epson POS website it does'nt list anything previous to the T88II :cry: Do you have these drivers: "Epson Advanced Printer Driver for TM Series Ver. 2.10E" - I have'nt installed them on my system to check, but perhaps an older version will...

I was a retail repair engineer (finish 04/06/04) so I have worked on just about everything retail! At the Gylemuir Community Centre (a charity webcafe) we have: 1x Dell Optiplex GX1 DT PII/400, 256Mb RAM, 20Gb HDD 1x Cashbases Narrow cashdrawer 1x Epson TM-H6000P 1x Barcode keyboard wedge scanner (A...

"When you log off of the POS at our local Grocer (Demoulas Market Basket), a small slip of recipt paper comes out with your name, items rung, average sale per minute, etc. And, sometimes at Wal*Mart, they put signs up with the Cashiers name, and how many Items per hour they are ringing, and they cha...

I repair Epson units, and I highly recommend them, the U220PD is a new unit replacing the U200/210PD I've tested most Parallel fitted Epsons with DH-POS successfully, my favourite is the Epson TM-T88IIIP. The unit I have in the picture that you saw is an Epson TM-H6000P, which is basically two print...

Dale,

I'll do a new photograph, as I've changed the hardware since then!

It should be "Gylemuir Community Association, Edinburgh, Scotland, UK"

Alan

DOS does support mice - it has done for over a decade!!!! You just need a tsr like mouse.com! I've got all of the drivers on a disk :) The software thats loaded on the units that I fix have a numeric keypad on the screen for data entry. If you use DH-POS on them you can plug in a standard keyboard &...

I'm working with Micros 3700 PC Touchscreen tills now, which have 12" TFT's and I have the DOS drivers would u believe!

So... I can test POS with touchscreen interface at any point

Alan

Thats the problem with using Aprint, it uses a windows font instead of a printer font hence the delay!

The new version of Aprint under development seems to have fixed that problem - coming soon I believe!

Alan

funnily enough the instructions for POS state that Serial printers are not recommended and don't really work properly with POS. The solution is to install the Windows drivers for the Star printer (Star Micronics) and use the Aprint application bundled with POS. The new version of Aprint currently un...

I'll be in touch!

Alan

Yes I had my Preh Commander MC128 keyboard setup for DH-POS without any problems! You need to program it with a key combination (a normal keyboard plugs into the Preh to allow you to do this) I think its "Alt Gr + Scroll Lock" which makes the Scrl Lock LED flash on and off, then enter your command "...

Hi there, I've tested POS on everything except Windows Me! The current installation at the Community Centre that I work voluntarily for is a Dell Optiplex GX1 PII/400 running Windows 2000 Pro. I've got various hardware that I've tested POS successfully on: 2x Epson TM-T88III (i have both serial & pa...