BETA test version of POS program available. 4 new features.

Make comments, ask questions, or just complain about the software on this site. Or comment on any educational software.
Please note that by clicking on links that may appear in these posts that you may be leaving the Dale Harris Educational Software website and that the content of those sites is the sole resposibility of the authors of those sites.

Moderators:daleadmin, Dale Harris, Alan, Andrew

Tina
Hard work

Post by Tina » Sat Feb 12, 2005 12:15 am

Wow you put alot of time & Effort into this & it shows!! You are doing a fine job!!

User avatar
Andrew
Site Administrator
Posts:822
Joined:Sun Dec 28, 2003 3:40 pm
Location:New Zealand

Post by Andrew » Sat Feb 12, 2005 6:58 am

Tina, did you remember to follow Dale's instructions and use DEFAULT ALL LABELS in Receipt Language with this new beta? Due to the addition of a new label.
Image
DHPOS Veteran (from v3.46, July 2002)

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Receipt labels

Post by Dale Harris » Sat Feb 12, 2005 9:26 am

Tina,

Remember that when you first use version 6.27 that you have to use the "Receipt language" feature in the POSCONFG.EXE program to set all of the receipt labels to their default. Then you can change them back to anything that you want.
Dale

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

New screen wins!

Post by Dale Harris » Sat Feb 12, 2005 9:38 am

The new screen wins. All further version of the POS program will have the new "sale" screen.


Here is the latest beta 6 version of the POS program. http://keyhut.com/pos.zip

This is very close to the final release version of the program.
Last edited by Dale Harris on Tue Feb 15, 2005 11:20 pm, edited 5 times in total.
Dale

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Default, default

Post by Dale Harris » Sat Feb 12, 2005 7:58 pm

Tina,

You have inspired me. The program will now load the default receipt labels the first time anyone runs the new version.

There, that should cause mass confusion. I bet my email count goes way up after this one.
Dale

Tina

Reciept Language

Post by Tina » Sat Feb 12, 2005 10:26 pm

I did load the default settings in the prior beta release. I will try again with the new release. I think your idea to load all default values makes sense becasue it will be ready to run right after install. People can then customize it later if they want to.

Tina

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Final beta version.

Post by Dale Harris » Mon Feb 14, 2005 7:40 pm

Ok folks, I think that this will be the final beta version of POS 6.27. You have 24 hours to find something wrong or I am going to upload the release version for general download.

<center> http://keyhut.com/pos.zip </center>
Last edited by Dale Harris on Tue Feb 15, 2005 11:20 pm, edited 1 time in total.
Dale

User avatar
peewee3ie
Forum Regular
Posts:225
Joined:Tue Jan 27, 2004 7:46 am
Location:Ireland
Contact:

Post by peewee3ie » Tue Feb 15, 2005 7:27 am

Posable bug cannot see the main menu of the software.
Tony McGuire
Ireland Support

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Details

Post by Dale Harris » Tue Feb 15, 2005 9:08 am

peewee3ie,

Got some more details on this? The main menu on which program file? What do you mean by "cannot see the main menu of the software?" Screen is blank? Just the menu is blank? Program hangs up before the menu is displayed? If you reload / re-run the program does it happen again?

Not being able to see the main menu is not something that could go unnoticed. People have been testing various beta versions for over a week with no previous mention of this problem.

It could be caused by some weird group of settings that you are using on your register. Could you send to me your register parameters by sending your ???????.POS file as an attachment to an email to daleharris@prodigy.net
Dale

FormicaFun

Latest Beta

Post by FormicaFun » Tue Feb 15, 2005 11:06 am

Dale,

Just when you think it's all ready to go... When you preform a "cash drop" everything works fine except for when you goto look at the "void" screens. It always subtracts .01 from the amount you drop. <ie 150.00 becomes 149.99>, as well as apearing this way on the journal. Yet the reciept from the transaction, and the totals on the sales report are fine.

I had the same "main menu vanishing" thing happen when I first downloaded the new version and when into "POS" first. Then I opened "POSCONFG", closed it and tried "POS" again and everything was ran fine.

I do like the cash pull/drop feature, but I'm with Tina on the rewording. I guess I'm just not used to it, but pull/drop sound like the same thing to me. Infact at work they're just another term that some use to describe "pickups". We refer to "pulls" as a "loan" because the office is "loaning" it to the register. Why not just change it to match the main menu? Cash Pull becomes Cash In, and Cash Drop becomes Cash Out. That way it's easier for people not familiar with the terms, fairly universal, and matches the lingo on the main screen.

-Ryan :-)

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Fixed

Post by Dale Harris » Tue Feb 15, 2005 12:07 pm

FormicaFun,

People around here wonder why I get heart palpitations as a new release of POS draws near. It is the little piddling stuff that drives me nuts.

Thanks for pointing out the 1¢ error it was a quick fix once I knew it was there. It was just an error in displaying the amount, it was stored correctly internally.

Since the problem with displaying the menu is apparently self correcting the uploading of the new version is still on schedule for tonight.
Dale

JF Mous
Forum Regular
Posts:19
Joined:Mon May 03, 2004 2:51 pm
Location:Antwerp/Belgium

Re: Cash back

Post by JF Mous » Tue Feb 15, 2005 12:26 pm

Dale Harris wrote:I guess I could prevent overpayment on a sale if credit is one of the payment methods used. That would still allow cash back on checks if credit is not also used as payment.
No, please don't disallow overpayment. Or at least leave us the option to allow it via posconfg.
I find this much easier (= faster) than using the cashback feature.
Let's say 1 or 2% of the customers ask for extra cash, I don't want to have the cashback "dialog box" popup on every sale (I know it's not much work to <enter> it away, but still...) and I don't mind doing the math myself.
If I'm no longer able to calculate those things from my head, I know it's time to book a room in a mental institution.

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Over payments

Post by Dale Harris » Tue Feb 15, 2005 1:11 pm

JF Mous,

Over payments will still be allowed. However if X-Charge ever gets finished and you sign up for it you will have to use the "cash back" option.
Dale

User avatar
peewee3ie
Forum Regular
Posts:225
Joined:Tue Jan 27, 2004 7:46 am
Location:Ireland
Contact:

Post by peewee3ie » Tue Feb 15, 2005 4:56 pm

Hi Dale

I have went to the computer and tryed it again and it works now. and I ahve worked out what happend windows xp did not refresh the folder quick because i have tryed creating a new one and the same the happend as i said above no menu at all exit it and refreshed the folder and ran the pos.exe agian and it worked.

Thank you for your time and help.
Tony McGuire
Ireland Support

User avatar
Dale Harris
Forum Owner
Posts:1171
Joined:Sun Dec 28, 2003 10:19 pm
Location:Chicago
Contact:

Fixes itself

Post by Dale Harris » Tue Feb 15, 2005 5:01 pm

peewee3ie,

Ok then, auto-repairing bug, the best kind.
Dale

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests